Microelectronic NH MicroM30/12 HDMI USB Especificaciones descargar pdf (Pagina 37)

The receiver

Caution!

Check that connections of all equipment and the

antenna are proper before connecting the receiver to

the mains.

 Insert the mains plugs of the connected equipment in

the mains socket and switch it on.

 Switch on the AV channel of the TV set. If the TV set

recognizes the switching voltage emitted by the

receiver, it will switch automatically to the AV mode.

When connected via HDMI, it is dependent on the

connected TV set, whether it automatically switches to

the AV mode, or whether you even need to call the AV

channel.

 Insert the mains plug of the receiver in the mains

socket. Turn on the mains switch on the rear side of

the receiver. The device is in normal mode. The green

LED is lit.

 If you want to operate your receiver with 12V, insert

the 12V cable into the “DC 12V IN” socket of the

receiver and connect it to your power source.

The receiver is supplied with preset TV channels and can

be used directly. If you want to check if new channels are

available, initiate a scan for broadcasting stations. Read

the information further below for this purpose.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 94 95

Sin comentarios

Microelectronic NH MicroM30/12 HDMI USB Especificaciones Pagina 37